45 Degree cutting center for aluminum doors and windows

14 Sep, 2020


The advantages and characteristics of the intelligent sawing and machining center are "three highs" and "three lows"

Three high:

● High profile utilization characteristics:

The sawing processing center basically realizes cutting without material head (only the blade width). Because the traditional double-headed saw is manual feeding, it must leave a 5-10mm left, and it is controlled by the workers themselves. The use of CNC manipulator for feeding can completely avoid the waste of profiles due to human operation. Cutting each finished profile can save 5-10mm profiles; by optimizing calculations, it can save about 1% of materials.

 

● High efficiency advantages:

The blanking time of each finished product is 10-13 seconds. According to 8 hours / can cut 2200-2600 pieces, which is 2-3 times more efficient than a double-head saw. (efficient)

● High precision structural features:

a. High angular accuracy, the left and right heads alternately cut , the saw blade angle is 45 degrees, the cutting angle is fixed, the angular accuracy is high, and the angle is controlled at ± 0.1 °.

b. The cutting verticality is high accuracy. The profile cutting adopts plate clamping. The cutting reference plane is the same as the reference plane of the group angle machine. As long as the profile has a good cutting reference plane, the cutting angle can be guaranteed. c. The cutting dimension has high precision. The manipulator feed guide adopts high-precision square guide rail and rack drive. It has high repeat positioning accuracy, consistent with any length accuracy, repeat positioning accuracy: ± 0.05mm, cutting length accuracy: ≤0.1mm.

 

d. There are three guide rails on the rack, and the error is only 2 wires per meter. The guide rail precision is high, and the precision of gears and racks reaches the German standard 6 level.

e. The stable frame can guarantee high precision. Through natural aging and vibration aging treatment, high stability of the frame is guaranteed.

f. The cutting surface of the cutting center and the group corner surface are in the same plane, which can better ensure the accuracy.

g. Our equipment is equipped with an isolation transformer to eliminate the instability of external voltage and achieve smooth operation of the equipment. (High precision)

Three lows:

 

● Reduced labor intensity. (Compared with ordinary double-headed saw)

● Reduced worker skill requirements. (Compared with ordinary double-headed saw)

● Reduced cutting error rate. (Compared with ordinary double-headed saw)

The sawing machining center uses a numerical control system. There are currently two types of blanking input methods, one is to manually enter data, and the other is to dock with the door and window design software and optimized blanking software to perform cutting according to the optimized blanking order. Workers only need to load and unload, which reduces the error rate of workers' operations, and does not require high-level operators, which reduces the labor intensity compared to ordinary double-headed saws.

In addition, according to the current environmental protection requirements of the country, we have developed an industrial vacuum cleaner that is matched with the sawing center, with low noise and good aluminum scrap collection effect.

 

2. Comprehensive evaluation: The sawing center has huge advantages for large and medium-sized door and window enterprises. Because the CNC system has certain flexible processing characteristics, it is suitable for tooling and home improvement door and window companies. (Tooling 50,000 square meters and above, home improvement 20,000 square meters and above)



Related Product: aluminum doors and windows

45 Degree CNC Cutting Center for Aluminum Doors and Windows

LJG2S-500*6500

45 Degree CNC Cutting Center for Aluminum Doors and Windows

CNC Double-head Miter Precision Cutting Saw for Aluminum and PVC Profile

LJJ2AS-500*4200

CNC Double-head Miter Precision Cutting Saw for Aluminum and PVC Profile

Digital Display Double-head Miter Precsion Cutting Saw for Aluminum and PVC Profile

LJJ2AX-500*4200

Digital Display Double-head Miter Precsion Cutting Saw for Aluminum and PVC Profile

aluminum doors and windows, Aluminium cutting saw, Aluminium profile cutter, Making aluminum cutting machine,

XML 地图 | Sitemap 地图